Tubular terminals: sold individually

TUBULAR TERMINALS: SOLD INDIVIDUALLY

For the correct connection of your equipment, remember to choose the right terminals. The terminal allows your wires to be securely attached to the connector or to the accessory directly without fear of it coming loose. The tubular terminal is a fixing that allows you to very easily connect your devices while allowing current to flow correctly. Choose the type of tubular stock you need on our site.

Presentation of the tubular terminal

The tubular lug is a very practical lug system. It is present throughout the vehicle alongside the claw terminals. It looks like a usual terminal, the end where the wire to be connected is however in the form of a receiving tube. The other end which will be attached to the connector is flat with a hole in the middle, it is to be connected with a screw, a stud, etc. Once the wire is inserted into the tube, all you have to do is crimp the terminal. It is generally made of copper, brass or aluminum. There are different types of tubular terminals depending on the size of the wires to be connected.

The type of tubular terminal we offer

For your various installations, choose quality terminals. In fact, poor quality of your terminals can alter the attachment system in the face of various attacks. The terminals available on our site meet strict quality standards, in order to resist humidity, oxidation and electrical impulses. The material from which it is made is also very important, choose brass, aluminum and copper terminals. The categories of tubular terminals are:

- Bare tubular terminals

- Tubular terminals with heat-refractory insulation

- Male and female tubular terminals

- Tubular terminals

- Tubular crimp terminals

The ideal terminal is of course the tubular terminal with insulation to guarantee good insulation of your connections. We sell them individually or in kits depending on your needs.

Choose the correct tubular terminal size

If you need to replace a tubular cog or if you need to install a new one, several specificities will need to be taken into account. Tubular terminals on the market vary in size and dimension. The receiving length of the tube must be taken into account, but also the diameter of the tube. The size of the screw or bolt that will tighten the eye of the terminal is also important to know. Once these conditions are met, the tubular terminals allow excellent fixation of your wires along their entire length. The wire thus trapped in the terminal can only be detached in the event of a wire break. The quality of the receiver tube is very important, as it must withstand the pressure of the crimper, without breaking or cracking. The folding must be done perfectly.

How to attach a tubular terminal?

Once you have found the right terminal on our site, you will need to equip yourself with some tools to attach it to the receiving wire. The tube intended to receive the wire must be crimped, so you will need special crimping pliers. To attach your wire, you will first need to strip it to the correct length. Twist the wire afterward for added strength. You can cover the cores with tin for better conduction. Place the core of the wire into the receiver tube, then crimp the tube with the pliers. The terminal must be crimped at the correct height so that everything is secure. Check the strength by pulling it lightly, then connect your terminal to the connector.