Battery bridge and cable bridge

Need battery bridge and cable bridge?

Like any mechanical device, the car is not immune to breakdowns. And usually this is caused by battery drain.

Bridge the battery: what does it involve?

To bridge the car battery, you must have battery cables and of course, a new battery model in good condition. And before any operation, it is strongly recommended not to smoke or play with fire. For good reason, car batteries contain gases that can explode when mixed. With the help of another driver, you must then approach the two cars while ensuring that they do not touch each other. And start the engine of the car that is helping, making sure to accelerate to benefit from more power.

And when this is done, you must remove the battery filler caps and connect the red cable clamp to the positive terminal of the recovery vehicle battery while the other clamp connects to the positive terminal of the defective battery. Same thing, place the black cable clamp on the negative terminal of the recovery vehicle's battery and another on that of the faulty vehicle.

Then, start the engine of the broken down car and remove the cable to the negative terminal of the discharged battery then the red cable to the positive terminal. All you have to do is activate the motor of the faulty battery so that it can recharge.

Discover our wide range of battery bridges and cable bridges

If you need a battery bridge or cable bridge, AutoTruck42 is the best place to find them. There is something for all needs and budgets. You will have plenty of time to choose from our vast collection. One thing is certain, you will leave with the model you are looking for, and with good value for money.